Hurricane Impact Doors in Stuart, FL | Licensed Installation

Hurricane Impact Doors in Stuart, FL

Impact-Rated Entry, French, and Sliding Glass Doors Installed Across Stuart and Martin County, Permits Handled, Lifetime Guarantee.

Hurricane impact doors in Stuart, FL are reinforced entry, French, and sliding glass door systems built with laminated impact glass and multipoint locks. We install them with our own crews across Stuart and Martin County, tested to ASTM E1996 large-missile standards, permitted with the local building department, and backed by a lifetime guarantee.

Why Stuart Homes Need Impact Doors

Stuart sits on the Treasure Coast, one of the most storm-exposed stretches of Florida's Atlantic shoreline. Two hurricanes proved it in 2004: Frances came ashore at Sewall's Point in Martin County on September 5, and Jeanne made landfall at nearly the same spot three weeks later. Doors that were not built for that wind did not hold.

A storm usually fails a home through an opening, not the roof first. When wind forces an entry door or a sliding glass panel out of its frame, pressure inside the house spikes and the damage multiplies. Along the St. Lucie River and the barrier-island neighborhoods, that exposure is higher still. Doors are part of the same protective shell as your windows, and one unprotected opening can undo the rest. Impact doors fix that weak point permanently, with laminated glass that stays in its frame and a reinforced frame anchored to the structure.

What an Impact Door Is Built From

An impact door earns its rating from the same engineering as an impact window, scaled up for a moving panel that a Stuart home opens and closes every day.

Laminated impact glass. Two panes bonded to a tough interlayer, so a debris strike may crack the outer layer while the glass stays in the frame and the opening stays sealed.
Reinforced frame and hardware. Heavy-duty frames, hinges and rollers rated for the panel weight, corrosion-resistant hardware for the salt air along the Treasure Coast, and multipoint locks that secure the door at three or more points.
Quieter, cooler rooms. The interlayer that stops debris also cuts street noise, and Low-E impact glass on sliders reduces solar heat gain through Stuart's long cooling season.
Year-round security. Multipoint locks and laminated glass resist forced entry at the door an intruder tries first, not only during storm season.

Types of Impact Doors We Install in Stuart

We match the door type to how Stuart homes are actually built, from downtown bungalows to riverfront and Sewall's Point properties.

Entry & Front Doors

Impact-rated fiberglass and glass-panel entry doors with multipoint locking, in single and double configurations with sidelites and transoms. Fiberglass holds up to coastal humidity without the upkeep wood demands.

French Doors

Double French doors with laminated impact glass, a reinforced astragal where the leaves meet, and hardware anchoring both the active and inactive leaf, common on older Stuart and Palm City homes.

Sliding & Patio Doors

Impact-rated sliders for lanai, pool, and riverfront openings, including tall three- and four-panel layouts, with heavy-duty rollers and interlocking stiles. Aluminum frames carry the highest ratings on the largest openings.

Impact Doors Compared With Storm Doors

DimensionImpact DoorsStorm Doors
What it isFull replacement exterior door with laminated impact glassSecondary door mounted in front of the existing entry
Code complianceMeets the opening-protection requirement on its ownDoes not substitute for impact protection
GlassLaminated impact glass, DP-rated assemblyTempered glass or screen panels
LockingMultipoint hardware at three or more pointsStandard latch and closer
Best usePrimary storm protection and securityVentilation and shielding the entry door

Many Stuart homes use both: an impact entry door as the protected opening, with a storm or screen door in front for airflow. If the goal is passing inspection and ending the shutter routine, the impact door is the one the code counts.

The Ratings a Martin County Inspector Checks

Every impact door we install carries the paperwork the Martin County building department checks before it signs off:

Large-missile impact test, ASTM E1996 and TAS 201: a nine-pound 2x4 fired at the assembly at roughly 34 mph, followed by thousands of pressure cycles in both directions.
Design pressure, or DP, rating: the wind load the full assembly resists, matched to your wind zone and opening size. Larger openings need higher-rated assemblies, which is why riverfront sliders are specified carefully.
Florida Product Approval: the statewide certification your permit is issued against, provided with every door we install.

No door is truly hurricane-proof; the accurate term is impact-rated, and the DP rating plus the product approval state exactly what the assembly is certified to take.

Permitting and Code in Stuart and Martin County

Every impact door installation in Stuart is permitted work. We file the permit with the Martin County building department along with the product approval documents inspectors require, book the inspections, and stay on the job until it passes.

Stuart sits in Martin County, outside the High-Velocity Hurricane Zone that covers Miami-Dade and Broward. Products here qualify under statewide Florida Product Approval rather than a Miami-Dade Notice of Acceptance. That widens the range of approved products available rather than lowering the standard: the design pressure your openings must hold is still calculated for your specific address, elevation, and exposure, and riverfront and barrier-island properties calculate higher than inland homes in the same city. Our own licensed crews pull the permit and meet the inspector at each stage.

Reaching Our Team From Stuart and Martin County

Our installation and measurement team serves Stuart from our Lake Park location at 1408 N Killian Dr, Suite 103, a short drive south by way of I-95 or Florida's Turnpike. We cover Stuart and the surrounding Treasure Coast communities of Jensen Beach, Palm City, Hobe Sound, Port Salerno, and Sewall's Point, for both homes and commercial buildings. Call (561) 517-9399 to arrange an on-site measurement anywhere in the Stuart area, or use the map for directions.

Doors Are Half of the Building Envelope

Doors work with your windows as one protective shell, and the openings we do not replace stay the weak point. Homeowners upgrading impact doors in Stuart commonly protect the rest of the envelope at the same time, which is also what a wind mitigation inspection looks for. We also install:

FAQ

Stuart Impact Door Questions

What is the difference between impact doors and hurricane doors?
Nothing. Impact doors, hurricane doors, and hurricane impact doors all refer to exterior door assemblies tested to Florida Building Code impact standards. The permit paperwork lists the product's Florida Product Approval number.
Do impact doors need shutters?
No. An impact-rated door meets the opening-protection requirement on its own, with nothing to put up before a storm. That is the practical difference between an impact door and a standard door behind a shutter or panel.
Are French doors safe in a hurricane?
Impact-rated French doors are. The laminated glass, the reinforced astragal where the two leaves meet, and the hardware anchoring both leaves are tested as one assembly under the large-missile standard. Older non-rated French doors are among the most storm-vulnerable openings on a house.
Do impact doors meet Martin County building code?
Yes. Impact doors carry Florida Product Approval and a design pressure rating matched to your opening, which is what the Martin County building department verifies. Because Stuart is outside the High-Velocity Hurricane Zone, a wider range of statewide-approved products qualifies.
Can impact doors be installed on a waterfront or barrier-island home in Stuart?
Yes, and the design pressure is calculated higher for those exposures. Riverfront and Sewall's Point openings are specified with higher-rated assemblies and corrosion-resistant hardware built for salt air.
Do I need a permit for impact doors in Stuart?
Yes. Impact door replacement in Stuart is permitted work, filed with the Martin County building department against the product's Florida Product Approval. We handle the permit and inspections as part of the installation.
How long does an impact door installation take on site?
A single entry or French door is usually a one-day installation, while large multi-panel sliders and multi-door projects run two to three days. Each door is built to the opening's measurements, so manufacturing happens before the on-site day is scheduled.

Book Your Stuart Impact Door Assessment

Call (561) 517-9399 or send the contact form and we will schedule an on-site measurement anywhere in Stuart and Martin County. Impact-rated entry, French, and sliding glass doors, installed by our own crews, permitted with Martin County, and backed by a lifetime guarantee.